Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Replacing your DSi's battery only requires a Phillips #00 screwdriver and a thin prying tool.

  1. Unscrew the two Phillips screws securing the battery cover to the lower case. The screws remain captive to the battery cover.
    • Unscrew the two Phillips screws securing the battery cover to the lower case.

    • The screws remain captive to the battery cover.

    • Grasp the battery cover and lift out of the lower case.

  2. Wedge the edge of a spudger in between the top of the battery and its lower case housing and pry upwards to dislodge the battery. Grasp the battery and remove it from the DSi.
    • Wedge the edge of a spudger in between the top of the battery and its lower case housing and pry upwards to dislodge the battery.

    • Grasp the battery and remove it from the DSi.

Conclusão

To reassemble your device, follow these instructions in reverse order.

10 outras pessoas concluíram este guia.

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 45

Últimos 30 dias: 200

Duração total: 13,577