Nintendo 64 Rumble Pak Battery Replacement - Guia de Reparo iFixit

Introdução

Does your Rumble Pak no longer vibrate? Learn how to check for corrosion and replace the batteries in your Rumble Pak to continue enjoying the ultimate gaming experience.

O que você precisa

Passo 1 Rumble Pak Battery

Nintendo 64 Rumble Pak Battery Replacement, Rumble Pak Battery: passo 1, imagem 1 %32

Remove the Rumble Pak from the controller by pressing the release button and pulling the Rumble Pak out.

Passo 2

Nintendo 64 Rumble Pak Battery Replacement: passo 2, imagem 1 %32

Remove the battery cover from the Rumble Pak by pressing the tab and pulling the cover up.

Passo 3

Nintendo 64 Rumble Pak Battery Replacement: passo 3, imagem 1 %32

Press each battery toward the spring, then pull toward you to remove the batteries from the Rumble Pak.
When inserting the new batteries, make sure the positive (+) end of the battery touches the flat piece, and the negative (-) end touches the spring.

Passo 4

Nintendo 64 Rumble Pak Battery Replacement: passo 4, imagem 1 %32

Nintendo 64 Rumble Pak Battery Replacement: passo 4, imagem 2 %32

Nintendo 64 Rumble Pak Battery Replacement: passo 4, imagem 3 %32

Check for corrosion around the springs and the flat plate where the batteries touch.
Do not touch the corrosion. It may be battery acid.
Use a flat head screwdriver to chisel away the corrosion, and use a Q-tip to wipe it clean.
Do not use water to wet the Q-tip, as water can damage the Rumble Pak.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Carly Bowen

Membro desde: 07/20/15

304 Reputação

Autoria de 1 guia

+2 outros emblemas

Equipe

Texas Tech, Team 3-6, Rauch SU 2015 Membro de Texas Tech, Team 3-6, Rauch SU 2015

TTU-RAUCH-SU15S3G6

Membros da 3

Autoria de 2 guias

0 comentários

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 12

Últimos 30 dias: 37

Duração total: 4,023