Conserte seus objetos

Direito de executar reparos

Loja

Nintendo 3DS Upper Display Assembly Replacement

Escrito Por: David Hodson (e 3 outros contribuidores)
  • Comentários: 2
  • Favoritos: 1

Dificuldade

Moderado

Passos

3

Tempo necessário

Sugerir um tempo??

Partes

1

Sinalizadores

1

Prerequisite Only

Pré-requisito somente

Por favor, note que este guia é apenas um pré-requisito para outros guias.

Introdução

This guide is a prerequisite to removing the upper LCD, speakers, Wi-Fi antenna, and cameras.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

  1. Remove the 3D adjustment switch from the front display bezel.

    • Remove the 3D adjustment switch from the front display bezel.

    • This step is not necessary for disassembly, but the switch is likely to fall out on its own. By removing it yourself, you reduce the chance of losing it.

    Editar

  3. Insert a metal probe into the space above the ABXY buttons with the point touching the metal hinge. Push the hinge towards the center of the upper case. This will require a fair amount of force. Before and after images of the hinge location when looking at the back of the upper display are shown.

    • Insert a metal probe into the space above the ABXY buttons with the point touching the metal hinge.

    • Push the hinge towards the center of the upper case. This will require a fair amount of force.

    • Before and after images of the hinge location when looking at the back of the upper display are shown.

    Editar

  4. Before proceeding, note how the 3 ribbon cables are oriented (what direction the gold contacts face) and layered together (which cable is on top of which). The cables are too short to reach if they are threaded through in any other orientation. Slowly pull the upper display assembly away from the upper case. Make sure that the various ribbon cables are being fed through the slit in the upper case.

    • Before proceeding, note how the 3 ribbon cables are oriented (what direction the gold contacts face) and layered together (which cable is on top of which). The cables are too short to reach if they are threaded through in any other orientation.

    • Slowly pull the upper display assembly away from the upper case.

    • Make sure that the various ribbon cables are being fed through the slit in the upper case.

    • Separate the upper display assembly from the upper case.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

com 3 outros contribuidores

David Hodson

Membro desde: 13/04/2010

143.326 Reputação

127 Guias de autoria

Emblemas: 52

+49 outros emblemas

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 189