Conserte seus objetos Comunidade Loja

Nintendo 3DS Motherboard Assembly Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

Introdução

Prerequisite guide for removing the motherboard assembly.

O que você precisa

  1. Nintendo 3DS Motherboard Assembly Replacement, Motherboard Assembly: passo 1, imagem 1 %32 Nintendo 3DS Motherboard Assembly Replacement, Motherboard Assembly: passo 1, imagem 2 %32

    • Grasp the microphone ribbon cable near the microphone with a pair of tweezers.

    • Pull the microphone straight up out of the upper case.

    Editar

  2. Nintendo 3DS Motherboard Assembly Replacement: passo 2, imagem 1 %32 Nintendo 3DS Motherboard Assembly Replacement: passo 2, imagem 2 %32 Nintendo 3DS Motherboard Assembly Replacement: passo 2, imagem 3 %32

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the speaker assembly ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, NOT the socket itself. Damaging the socket or cable will result in a 3DS that will blink its power LED when you press the power button - and do nothing else.

    • Disconnect the speaker assembly ribbon cable with a pair of tweezers.

    Editar

  4. Nintendo 3DS Motherboard Assembly Replacement: passo 3, imagem 1 %32 Nintendo 3DS Motherboard Assembly Replacement: passo 3, imagem 2 %32

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the camera ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • When reassembling, note that the gold contacts face toward the motherboard (as opposed to the camera cable's gold contacts facing away).

    Editar

  5. Nintendo 3DS Motherboard Assembly Replacement: passo 4, imagem 1 %32 Nintendo 3DS Motherboard Assembly Replacement: passo 4, imagem 2 %32 Nintendo 3DS Motherboard Assembly Replacement: passo 4, imagem 3 %32

    • Remove seven Phillips screws securing the motherboard to the upper case:

    • Four 2.5 mm gold screws

    • Two 3.5 mm black screws

    • One 2.5 mm silver screw

    • When you remove this screw the volume slider can fall out.

    • Lift the side of the motherboard that sits along the bottom edge of the 3DS.

    Editar

  6. Nintendo 3DS Motherboard Assembly Replacement: passo 5, imagem 1 %32 Nintendo 3DS Motherboard Assembly Replacement: passo 5, imagem 2 %32 Nintendo 3DS Motherboard Assembly Replacement: passo 5, imagem 3 %32

    • Continue lifting the motherboard assembly and rotate it until it is resting next to the rest of the device.

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the LCD ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself. Damaging the socket or cable will result in a 3DS that won't have a functional top screen.

    Editar

  7. Nintendo 3DS Motherboard Assembly Replacement: passo 6, imagem 1 %32

    • Remove the motherboard assembly from the rest of the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 6 outros contribuidores

David Hodson

Membro desde: 04/13/10

150.493 Reputação

Autoria de 127 guias

Emblemas: 53

+50 outros emblemas

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,577