Conserte seus objetos Comunidade Loja

Ninja Professional BL610 LED Replacement

Introdução

Use this guide to replace the LED on the circuit board of your device.

O que você precisa

  1. Ninja Professional BL610 LED Replacement, LED: passo 1, imagem 1 %32

    • Remove six screws (12mm long, 6mm head diameter) from bottom of the blender using a Phillips #2 screwdriver.

    Editar

  2. Ninja Professional BL610 LED Replacement: passo 2, imagem 1 %32

    • Remove six screws (12mm long, 6mm head diameter) from component housing using Phillips #2 screwdriver.

    Editar

  4. Ninja Professional BL610 LED Replacement: passo 3, imagem 1 %32

    • Remove five screws from circuit board using Phillips #2 screwdriver.

    Editar

  5. Ninja Professional BL610 LED Replacement: passo 4, imagem 1 %32

    • Once the screws are removed, lift the circuit board to access the back.

    Editar

  6. Ninja Professional BL610 LED Replacement: passo 5, imagem 1 %32

    • Locate the LED you wish to replace and note its position on the opposite side of the circuit board.

    Editar

  7. Ninja Professional BL610 LED Replacement: passo 6, imagem 1 %32

    • Desolder both of the LED leads and remove the LED light. Note the orientation of LED, this is important for replacing the LED. The Replacement LED needs to be soldered in the same orientation.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Rosniel Castro

Membro desde: 09/27/17

482 Reputação

Autoria de 4 guias

Emblemas: 8

+5 outros emblemas

Equipe

USF Tampa, Team S14-G3, Boczar Fall 2017 Membro de USF Tampa, Team S14-G3, Boczar Fall 2017

USFT-BOCZAR-F17S14G3

Membros da 4

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 152