Ninja Professional BL610 Fan Replacement

Introdução

In this guide we will be removing the blender base and the component housing to get to the fan.

Remove six screws (12mm long, 6mm head diameter) from bottom of the blender using a Phillips #2 screwdriver

Remove six screws (12mm long, 6mm head diameter) from component housing using Phillips #2 screwdriver.

Using a needle nose pliers, remove nut holding fan in-place. Be careful with fan blades and use a glove or a thick cloth to protect hands.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Membro desde: 09/27/17

482 Reputação

Autoria de 4 guias

USFT-BOCZAR-F17S14G3

Membros da 4

Autoria de 4 guias