Conserte seus objetos Comunidade Loja

Ninja Professional BL610 Button Replacement

Introdução

Use this guide to replace the buttons on your device.

O que você precisa

  1. Ninja Professional BL610 Button Replacement, Button: passo 1, imagem 1 %32

    • Remove six screws (12mm long, 6mm head diameter) from bottom of the blender using a Phillips #2 screwdriver.

    Editar

  2. Ninja Professional BL610 Button Replacement: passo 2, imagem 1 %32

    • Remove six screws (12mm long, 6mm head diameter) from component housing using Phillips #2 screwdriver.

    Editar

  4. Ninja Professional BL610 Button Replacement: passo 3, imagem 1 %32

    • Remove five screws from circuit board using Phillips #2 screwdriver.

    Editar

  5. Ninja Professional BL610 Button Replacement: passo 4, imagem 1 %32

    • Once the screws are removed, lift the circuit board to access the back.

    Editar

  6. Ninja Professional BL610 Button Replacement: passo 5, imagem 1 %32

    • Locate the button you wish to replace and note its position on the opposite side of the circuit board. They are marked with the letters ¨sw¨ on the circuit board.

    Editar

  7. Ninja Professional BL610 Button Replacement: passo 6, imagem 1 %32

    • Using a soldeing gun and soldering wick,desolder the for connection points and remove the button.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Rosniel Castro

Membro desde: 09/27/17

482 Reputação

Autoria de 4 guias

Emblemas: 8

+5 outros emblemas

Equipe

USF Tampa, Team S14-G3, Boczar Fall 2017 Membro de USF Tampa, Team S14-G3, Boczar Fall 2017

USFT-BOCZAR-F17S14G3

Membros da 4

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 165