Conserte seus objetos Comunidade Loja

Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement

Introdução

The water reservoir hanger is located on the left side of the brew basket and filter. This small component is crucial for making sure the water reservoir is secure and attached to the rest of the device. Follow this guide to replace the water reservoir hanger and resecure your water reservoir.

O que você precisa

  1. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: passo 1, imagem 1 %32 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: passo 1, imagem 2 %32

    • Remove single 6mm #1 Phillips head screw from the side of the unit and four 6mm screws from under the basket area.

    Editar

  3. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: passo 2, imagem 1 %32 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: passo 2, imagem 2 %32

    • Gently pry the upper panel up from the unit.

    Editar

  4. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: passo 3, imagem 1 %32

    • Inside the panel, remove the two 6mm #1 Phillips head screws. Remove and replace water reservoir clip as necessary.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

CJ Berg

Membro desde: 11/05/18

444 Reputação

Autoria de 4 guias

Emblemas: 5

+2 outros emblemas

Equipe

UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 Membro de UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018

UMASSD-GULBRANDSEN-F18S5G4

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 802