Introdução

The user will learn how to replace the selector button set including the menu, home, and back buttons on the Nikon Coolpix S800c. This replacement may be necessary due to damage on the unit.

Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).
  • Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

Adicionar comentário

Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.
  • Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

Adicionar comentário

  • Isolate the back panel/touch screen section.

  • Using a Phillips #00 head screwdriver (found in iFixit tool kit), remove the 2 screws that secure the metal plate protecting the selector buttons.

  • Pry the small metal plate up with a plastic tool of your choice.

Adicionar comentário

  • Remove the selector button chain by prying it up with plastic tool of your choice.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Erik Knapton

Member since: 30-01-2018

207 reputação

2 Guides authored

Equipe

Baylor, Team S2-G6, Johnson Spring 2018 Membro de Baylor, Team S2-G6, Johnson Spring 2018

BU-JOHNSON-S18S2G6

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 44