Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

This guide will outline how to remove a dead battery, as well as how to properly install a new one.

Ferramentas

Nenhuma ferramenta especificada.

    • At the top of the camera, turn the Mode dial to OFF.

  1. Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.
    • Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.

    • To open the battery compartment, push the latch underneath the word BATTERY to the left.

  2. Kit de pontas universal para chave

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de pontas universal para chave

    Upgrade Your Toolbox
  3. Lift the battery compartment cover and remove the old battery.
    • Lift the battery compartment cover and remove the old battery.

  4. Insert the new battery as shown on the underside of the compartment lid.
    • Insert the new battery as shown on the underside of the compartment lid.

  5. Flip the battery compartment lid closed and push the latch to the right.
    • Flip the battery compartment lid closed and push the latch to the right.

    • Flip the camera so that the bottom rests on the table.

    • Turn the Mode dial to [A] to verify that the control panel shows a full power indicator.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cory Layman

Membro desde: 04-10-2011

89 Reputação

3 Guias de autoria

Equipe

UW Stout, Team 1-5, Zhou Fall 2011 Membro de UW Stout, Team 1-5, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G5

5 Membros

3 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 8

Duração total: 1,531