Introdução

This guide is to be used to install the back cover in the event that it becomes damaged. A Phillips screwdriver will be needed to complete this installation.

Peças

Não são necessárias peças.

  1. Remove wrist strap by unknotting the strap.
    • Remove wrist strap by unknotting the strap.

    Adicionar comentário

  2. Open SD/Battery cover.
    • Open SD/Battery cover.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.

    Adicionar comentário

    • Pull the silver side panels on each side.

    Adicionar comentário

    • On the right side of the camera (that contains the wrist strap loop), use the screwdriver to remove the two screws holding the backplate in place.

      • Repeat this step for the left side.

    Adicionar comentário

    • Pull the back silver faceplate to separate it from the rest of the camera.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Patty Richeson

Member since: 11-03-2013

75 reputação

4 Guides authored

Equipe

Clemson, Team 12-5, Benson Spring 2013 Membro de Clemson, Team 12-5, Benson Spring 2013

CLEM-BENSON-S13S12G5

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 8

Todo: 391