Remove the screw located near the speaker port using a Phillips 00 screwdriver.
  • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

Adicionar comentário

Turn camera upside down so that the battery compartment is facing you.
  • Turn camera upside down so that the battery compartment is facing you.

  • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

Adicionar comentário

Rotate the camera to the opposite side where the A/V outlet is located.
  • Rotate the camera to the opposite side where the A/V outlet is located.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Adicionar comentário

Turn the camera so that the Wi-Fi adapter is facing you.
  • Turn the camera so that the Wi-Fi adapter is facing you.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Adicionar comentário

Using a plastic opening tool, pry the front casing of the camera. Continue this motion all around the front casing of the camera. Gently pull apart the front casing from the rest of the camera.
  • Using a plastic opening tool, pry the front casing of the camera.

  • Continue this motion all around the front casing of the camera.

  • Gently pull apart the front casing from the rest of the camera.

Adicionar comentário

Using the plastic opening tool pry the back casing of the camera.
  • Using the plastic opening tool pry the back casing of the camera.

Adicionar comentário

Orange ribbon is fragile
  • Orange ribbon is fragile

  • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

Adicionar comentário

Pull down the on the black latch to carefully separate the orange ribbon from the motherboard. Pull apart the orange ribbon and front casing from the rest of the camera.
  • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

  • Pull apart the orange ribbon and front casing from the rest of the camera.

Adicionar comentário

Use plastic opening tool to carefully pry the LCD Screen from the camera. Use plastic opening tool to carefully pry the LCD Screen from the camera.
  • Use plastic opening tool to carefully pry the LCD Screen from the camera.

Adicionar comentário

Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard. Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard.
  • Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard.

Adicionar comentário

De-solder the black and red wires from the mainboard.

Adicionar comentário

Continue by removing two screws from the back of the camera body.
  • Continue by removing two screws from the back of the camera body.

Adicionar comentário

Remove the screw connecting the wifi card cover to the front of the camera.
  • Remove the screw connecting the wifi card cover to the front of the camera.

Adicionar comentário

Remove the final screw connecting the Wifi card cover to the case.
  • Remove the final screw connecting the Wifi card cover to the case.

Adicionar comentário

Gently pull the Wifi card cover off of the camera body.
  • Gently pull the Wifi card cover off of the camera body.

Adicionar comentário

Remove the screw holding the Wifi Card to the camera body.
  • Remove the screw holding the Wifi Card to the camera body.

Adicionar comentário

Gently pull the WiFi card out of the camera.
  • Gently pull the WiFi card out of the camera.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Joshua Avery

Member since: 23-01-2012

7 reputação

3 Guides authored

Equipe

Cal Poly, Team 3-28, Amido Winter 2012 Membro de Cal Poly, Team 3-28, Amido Winter 2012

CPSU-AMIDO-W12S3G28

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 754