Ir para o conteúdo principal

Nike SportWatch GPS Front Panel Replacement

O que você precisa

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: passo 1, imagem 1 %32
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: passo 2, imagem 1 %32
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: passo 3, imagem 1 %32
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: passo 4, imagem 1 %32
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: passo 5, imagem 1 %32
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: passo 6, imagem 1 %32
    • Push the panel out from the back of the screen, using your fingers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ian Eichorn

Membro desde: 10/22/15

678 Reputação

Autoria de 4 guias

Equipe

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 Membro de UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G8

Membros da 3

Autoria de 5 guias

Um comentário

Where I can find the replacement glass? regards

Erick Sobreiro - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 5

Duração total: 1,258