Ir para o conteúdo principal

Nike SportWatch GPS Back Panel Replacement

O que você precisa

  1. Nike SportWatch GPS Back Panel Replacement, Back Panel: passo 1, imagem 1 %32
    • Face the watch upside down, so that the back of the watch is exposed. Unscrew the six #000 size 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Back Panel Replacement: passo 2, imagem 1 %32
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Back Panel Replacement: passo 3, imagem 1 %32
    • Pry the black plastic piece above the battery out using a nylon or metal spudger.

    • Be careful not to break the metal flat bands located above the plastic piece. They are fragile and easily breakable.

  4. Nike SportWatch GPS Back Panel Replacement: passo 4, imagem 1 %32
    • Using a guitar pick removal tool, push under the battery to pry the battery out of the watch.

  5. Nike SportWatch GPS Back Panel Replacement: passo 5, imagem 1 %32
    • After taking the battery out, you will be left with just the band and the backpanel part of the watch.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ian Eichorn

Membro desde: 10/22/15

678 Reputação

Autoria de 4 guias

Equipe

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 Membro de UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G8

Membros da 3

Autoria de 5 guias

3 comentários

Where can I find a new watch band?

rhalljr68 - Responder

You can´t. Nike left us alone

Leonardo Cartier - Responder

So, no way to repair the band then if there's no replacement parts? :(

roycy Tan - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 8

Duração total: 2,548