Introdução

This is a relatively easy repair to make to your Q. Follow the prerequisite for removing the inner dome daughterboard to get started.

  1. Squeeze and pull to pop the cap off of the Nexus Q.
    • Squeeze and pull to pop the cap off of the Nexus Q.

  2. Disconnect the taoglas Wi-Fi Dual Band Antenna by prying with a spudger.
    • Disconnect the taoglas Wi-Fi Dual Band Antenna by prying with a spudger.

    • Once the antenna is disconnected, simply pull it off the outside of the inner dome.

    • Undo the ZIF connector by prying with a spudger.

    • Use a T10 Torx screwdriver to remove the four 1.3 mm screws holding the inner dome in place.

    • Use a T6 Torx screwdriver to undo the three 0.8 mm screws holding the inner dome daughterboard in place.

    • Use a spudger to disconnect the daughterboard from the ZIF connector.

    • Use a spudger to pry out the NFC antenna.

    • The antenna has two layers; be careful not to pry the two layers apart.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Alex Thomas

Member since: 31-01-2013

27 reputação

3 Guides authored

Equipe

Cal Poly, Team 7-10, Maness Winter 2013 Membro de Cal Poly, Team 7-10, Maness Winter 2013

CPSU-MANESS-W13S7G10

4 Membros

5 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 522