Peças

Não são necessárias peças.

Turn the device over so it is upside-down.
  • Turn the device over so it is upside-down.

Adicionar comentário

Unscrew the 4 screws closest to the screen.
  • Unscrew the 4 screws closest to the screen.

Adicionar comentário

  • Flip over the device so it is right side up.

Adicionar comentário

  • Unscrew the 2 screws on the top of the device, next to the docking plug.

Adicionar comentário

  • Take off top piece by using slight force and pulling off.

Adicionar comentário

  • Unscrew the button board with smaller screwdriver.

Adicionar comentário

  • Lift off the button board.

Adicionar comentário

  • Unscrew all visible of the screws on the black logic board cover with the larger screwdriver.

Adicionar comentário

  • Lift the screen vertically straight up.

    • As you do this the logic board should move off with it.

Adicionar comentário

  • Flip the screen and the logic board over to the right side.

Adicionar comentário

  • Pull out the white plug that goes from the speakers to the logic board.

  • Then plug back in making sure it is completely connected.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Michelle Read

Member since: 26-09-2012

1 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 7-50, Forte Fall 2012 Membro de Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 299