Pular para o conteúdo principal

Introdução

Use this guide to replace a broken back panel. Sliding the plastic opening tool between the back panel and the front glass can be difficult.

Peças

Nenhum componente especificado.

  1. Using your finger, open the plastic tab to the right of the rear-facing camera. Wedge your fingernail in between the back panel and the plastic tab and pull the plastic tab towards your body.
    • Using your finger, open the plastic tab to the right of the rear-facing camera.

    • Wedge your fingernail in between the back panel and the plastic tab and pull the plastic tab towards your body.

  2. Using your finger, remove the SD card by pressing down on top of it (toward the bottom of the device) until you hear a clicking sound. Once the card pops out, use your finger to pull the card completely out of the SD card slot. Once the card pops out, use your finger to pull the card completely out of the SD card slot.
    • Using your finger, remove the SD card by pressing down on top of it (toward the bottom of the device) until you hear a clicking sound.

    • Once the card pops out, use your finger to pull the card completely out of the SD card slot.

  3. Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora
  4. Remove the 5 mm screw using the Phillips PH00 bit in the iFixit metal Screwdriver. Remove the 5 mm screw using the Phillips PH00 bit in the iFixit metal Screwdriver. Remove the 5 mm screw using the Phillips PH00 bit in the iFixit metal Screwdriver.
    • Remove the 5 mm screw using the Phillips PH00 bit in the iFixit metal Screwdriver.

  5. Use the plastic opening tool to separate the back panel by carefully sliding the narrow end of the tool between the front glass and back panel. Use a second plastic opening tool to help pry the front glass from the back panel. You will hear some cracking sounds when separating the front glass from the back panel. That is okay! That is the back panel latches releasing the front glass.
    • Use the plastic opening tool to separate the back panel by carefully sliding the narrow end of the tool between the front glass and back panel.

    • Use a second plastic opening tool to help pry the front glass from the back panel.

    • You will hear some cracking sounds when separating the front glass from the back panel. That is okay! That is the back panel latches releasing the front glass.

  6. Use your hands to completely separate the rest of the front glass from the back panel. Do not to pull the device apart with too much force. If you do, you may break or bend the back panel.
    • Use your hands to completely separate the rest of the front glass from the back panel.

    • Do not to pull the device apart with too much force. If you do, you may break or bend the back panel.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Philip Gai

Membro desde: 22-09-2015

711 reputação

3 Guias de autoria

Equipe

Baylor, Team 10-15, Williams Fall 2015 Membro de Baylor, Team 10-15, Williams Fall 2015

BU-WILLIAMS-F15S10G15

3 Membros

8 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 7

Todo: 696