Introdução

By removing the case you will be able to install a capacitor or an antenna.

Peças

Não são necessárias peças.

  1. Rotate the device so that the bottom is facing up.
    • Rotate the device so that the bottom is facing up.

  2. Lift up all four rubber pads on the bottom of the router with the plastic opening tool.
    • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

    • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

    • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

    • Lift the bottom casing straight up from the router.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ryan Murphy

Member since: 03-10-2011

482 reputação

4 Guides authored

Equipe

Cal Poly, Team 21-24, Maness Fall 2011 Membro de Cal Poly, Team 21-24, Maness Fall 2011

CPSU-MANESS-F11S21G24

4 Membros

6 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 1,202