Introdução

Keep your Nerf N-Strike Elite Hail-Fire running with new batteries.

Peças

Não são necessárias peças.

  1. Remove the two 9.0 mm Phillips screws from the battery compartment.
    • Remove the two 9.0 mm Phillips screws from the battery compartment.

    Adicionar comentário

  2. Pull the battery compartment out and away from the gun.
    • Pull the battery compartment out and away from the gun.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Apply downwards pressure on the battery you're trying to remove in the direction of the spring.

    Adicionar comentário

    • Pull battery straight out. Do not throw used batteries in the trash! Please electronically recycle them properly.

    Adicionar comentário

    • When installing new batteries, ensure that their polarities are facing the correct directions. Follow the inscriptions on the bottom of the battery tray, or place the flat side of each battery against the spring.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Jonathan Peck

Member since: 24-01-2014

166 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 13-13, Regan Winter 2014 Membro de Cal Poly, Team 13-13, Regan Winter 2014

CPSU-REGAN-W14S13G13

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 8

Últimos 7 dias: 56

Últimos 30 dias: 234

Todo: 16,563