Introdução

Follow these steps to remove or replace a dead battery from your Neato Botvac D8000.

Peças

Não são necessárias peças.

  1. Turn the robot upside down to locate the battery cover.
    • Turn the robot upside down to locate the battery cover.

    Adicionar comentário

  2. Use a Phillips #1 screwdriver to unscrew both of the 20mm screws.
    • Use a Phillips #1 screwdriver to unscrew both of the 20mm screws.

    • Gently lift the battery cover.

    • Remove the battery cover to reveal the battery.

    Adicionar comentário

    • Use a flathead screwdriver to push down on the latch of the battery clip.

    • Simultaneously, pull on the battery while pushing down on the latch to detach the battery from the clip.

    • Do not pull on the wires that are connected to the battery.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Michelle Sanchez

Member since: 22-03-2018

147 reputação

Autoria de 1 guia

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 19

Todo: 122