Introdução

Removing the motherboard will allow you to replace it, or give you access to the other components that are attached to it.

Peças

Não são necessárias peças.

  1. Turn the device so that the bottom is facing up.
    • Turn the device so that the bottom is facing up.

    Adicionar comentário

  2. Use the plastic opening tool to carefully lift the rubber stops in each corner.
    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

    Adicionar comentário

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

    Adicionar comentário

    • Lift the lower case straight up from the rest of the router.

    Adicionar comentário

    • Remove the clear plastic casing by lifting it straight up from the router.

    Adicionar comentário

    • Separate the motherboard from the top shell by lifting it straight up from the router.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Corey Worthington

Member since: 24-01-2013

47 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 3-31, Amido Winter 2013 Membro de Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 375