Introdução

Removing the lower case allows you to replace the hardware inside the device.

Peças

Não são necessárias peças.

Turn the device so that the bottom is facing up.
  • Turn the device so that the bottom is facing up.

Adicionar comentário

Use the plastic opening tool to carefully lift the rubber stops in each corner.
  • Use the plastic opening tool to carefully lift the rubber stops in each corner.

  • Do not completely remove the rubber stops, because they are difficult to replace.

Adicionar comentário

  • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

Adicionar comentário

  • Lift the lower case straight up from the rest of the router.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Nicole Slagle

Member since: 25-01-2013

77 reputação

2 Guides authored

Equipe

Cal Poly, Team 3-31, Amido Winter 2013 Membro de Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 319