Introdução

The bottom cover must be removed prior to replacing or repairing any internal parts of the Mr. Coffee TF6 (hot plate, power cord, and water tubes). In the event that the bottom cover breaks or must be replaced, a replacement cover must by obtained from the manufacturer.

Peças

Não são necessárias peças.

  1. Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.
    • Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.

    Adicionar comentário

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.
    • Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.

    Adicionar comentário

    • Gently lift the bottom cover, detaching it from the main body of the TF6.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Johnny Romeka

Member since: 24-01-2014

201 reputação

2 Guides authored

Equipe

Cal Poly, Team 13-18, Regan Winter 2014 Membro de Cal Poly, Team 13-18, Regan Winter 2014

CPSU-REGAN-W14S13G18

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 358