Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Motorola i90c speaker replacement

O que você precisa

  1. Motorola i90c speaker replacement, Battery: passo 1, imagem 1 %32 Motorola i90c speaker replacement, Battery: passo 1, imagem 2 %32 Motorola i90c speaker replacement, Battery: passo 1, imagem 3 %32
    • Slide the notch downward while pulling the back cover off to remove it.

  2. Motorola i90c speaker replacement: passo 2, imagem 1 %32 Motorola i90c speaker replacement: passo 2, imagem 2 %32 Motorola i90c speaker replacement: passo 2, imagem 3 %32
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

  3. Motorola i90c speaker replacement, Antenna: passo 3, imagem 1 %32 Motorola i90c speaker replacement, Antenna: passo 3, imagem 2 %32
    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

  4. Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: passo 4, imagem 1 %32 Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: passo 4, imagem 2 %32 Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: passo 4, imagem 3 %32
    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

  5. Motorola i90c speaker replacement: passo 5, imagem 1 %32 Motorola i90c speaker replacement: passo 5, imagem 2 %32
    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

  6. Motorola i90c speaker replacement: passo 6, imagem 1 %32 Motorola i90c speaker replacement: passo 6, imagem 2 %32 Motorola i90c speaker replacement: passo 6, imagem 3 %32
    • Carefully pry off the connection between the headphone jack and logic board.

  7. Motorola i90c speaker replacement, Speaker System: passo 7, imagem 1 %32 Motorola i90c speaker replacement, Speaker System: passo 7, imagem 2 %32 Motorola i90c speaker replacement, Speaker System: passo 7, imagem 3 %32
    • Use the prying tools to wedge out the circular part of the speaker system.

    • Carefully pull out the wiring and circuit board attached to the speaker system using a prying tool or tweezers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jorge

Membro desde: 04/14/10

4 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 29-61, Johann Spring 2010 Membro de Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 1,178