Introdução

This guide will install the motherboard, which will require removal of the battery and disconnection of the speaker and microphone ribbon cables.

Peças

Não são necessárias peças.

Place thumb on the rubber tab on the lower back of the phone.
  • Place thumb on the rubber tab on the lower back of the phone.

  • Push away from the phone to release back panel.

Adicionar comentário

Lift the back panel of the phone to expose battery (not shown here).
  • Lift the back panel of the phone to expose battery (not shown here).

Adicionar comentário

  • Pull the antenna up to reveal two of the six screws.

Adicionar comentário

  • Unscrew all six screws on the back side of the phone using a T-6 bit.

Adicionar comentário

  • Gently separate the front and back sides of the phone, as shown in the picture.

  • Be careful not to break or bend the ribbon cables.

Adicionar comentário

  • Detach the first ribbon cable by unplugging it from the motherboard.

Adicionar comentário

  • Detach the speaker ribbon cable from the motherboard.

Adicionar comentário

  • Remove the motherboard from the front half of the phone by gently shaking it loose. It should come out with little to no trouble.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ariel

Member since: 11-03-2013

16 reputação

4 Guides authored

Equipe

Clemson, Team 13-6, Benson Spring 2013 Membro de Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 Membros

10 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 87