Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

As this replacement guide works on an internal component of the Xoom Wifi, completion of prior steps to remove external parts is necessary.

Peças

Nenhum componente especificado.

  1. There are two 6.6 mm screws that hold ports into place as well as the back panel. Remove these with a T5 Torx screwdriver. There are two 6.6 mm screws that hold ports into place as well as the back panel. Remove these with a T5 Torx screwdriver.
    • There are two 6.6 mm screws that hold ports into place as well as the back panel. Remove these with a T5 Torx screwdriver.

  2. Apply light pressure with hand and slide the back plate till it stops in this position. There is a flex clip on both sides that need to be pushed down in order for the plate to slide off completely. Use a plastic opening tool to release the flex clips. They are located under the back cover near the sides.
    • Apply light pressure with hand and slide the back plate till it stops in this position.

    • There is a flex clip on both sides that need to be pushed down in order for the plate to slide off completely. Use a plastic opening tool to release the flex clips. They are located under the back cover near the sides.

    • As soon as the clips are released the back should slide off.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Confira os kits

    Enough RAM
    For All The Tabs

    Confira os kits
  4. Remove last two 4.2 mm screws from the remaining back piece with a T5 Torx screwdriver. Once both screws are taken out, lift the rest of the backing out of the way. Once both screws are taken out, lift the rest of the backing out of the way.
    • Remove last two 4.2 mm screws from the remaining back piece with a T5 Torx screwdriver.

    • Once both screws are taken out, lift the rest of the backing out of the way.

  5. Use a plastic opening tool to pop out the speaker.  Make sure to carefully pull off the wire as well. Replace speaker if necessary.
    • Use a plastic opening tool to pop out the speaker. Make sure to carefully pull off the wire as well.

    • Replace speaker if necessary.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Mallika

Membro desde: 20/04/2014

464 Reputação

2 Guias de autoria

Equipe

Cal Poly, Team 3-39, Maness Spring 2014 Membro de Cal Poly, Team 3-39, Maness Spring 2014

CPSU-MANESS-S14S3G39

4 Membros

16 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 166