Introdução

This guide shows how to take apart the front casing. This allows access to the front LCD screen.

Peças

Não são necessárias peças.

Push in and hold small release latch.
  • Push in and hold small release latch.

  • Hold the latch through step 2.

Adicionar comentário

While holding the release latch, use a opening tool to help you slide off the front cover. While holding the release latch, use a opening tool to help you slide off the front cover. While holding the release latch, use a opening tool to help you slide off the front cover.
  • While holding the release latch, use a opening tool to help you slide off the front cover.

Adicionar comentário

Free Shipping on all orders US$79,00 and up.

Visite Nossa Loja
MANTA DRIVER KIT
112 bit driver kit $59.99
MANTA DRIVER KIT
112 bit driver kit $59.99
Remove the two Philips screws at top of phone with a #1 Philips screwdriver. Remove the two Philips screws at top of phone with a #1 Philips screwdriver.
  • Remove the two Philips screws at top of phone with a #1 Philips screwdriver.

Adicionar comentário

Use a opening tool to gently pry off black cover, revealing the internal LCD display. Use a opening tool to gently pry off black cover, revealing the internal LCD display. Use a opening tool to gently pry off black cover, revealing the internal LCD display.
  • Use a opening tool to gently pry off black cover, revealing the internal LCD display.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Eric Freeman

Member since: 26-01-2010

1 reputação

13 Guides authored

Equipe

Cal Poly, Team 8-48, Regan Winter 2010 Membro de Cal Poly, Team 8-48, Regan Winter 2010

CPSU-REGAN-W10S8G48

4 Membros

13 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 2,151