Pular para o conteúdo principal

Introdução

How to replace the side buttons.

Peças

Nenhum componente especificado.

  1. Depress the silver button. Pull from top of phone to lift the cover.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

  2. Hold battery from both sides at the bottom. Push upwards and gently lift to remove.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

  3. Remove 4 screws from corners using T-6 screwdriver.
    • Remove 4 screws from corners using T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

  4. Use a plastic opening tool to pry up back cover from two side clips. NOTE: sticker might be attached to rest of phone.
    • Use a plastic opening tool to pry up back cover from two side clips.

    • NOTE: sticker might be attached to rest of phone.

  5. Remove the back cover.
    • Remove the back cover.

  6. Use a plastic opening tool to gently remove the orange ribbon cable. Lift up the main logic board.
    • Use a plastic opening tool to gently remove the orange ribbon cable.

    • Lift up the main logic board.

    • NOTE: Rubber side buttons are not secure and might detach from the main logic board during removal.

  7. Carefully flip over main logic board. Remove rubber side buttons.
    • Carefully flip over main logic board.

    • Remove rubber side buttons.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

Membro desde: 10-04-2010

1 reputação

5 Guias de autoria

Equipe

Cal Poly, Team 25-86, Amido Spring 2010 Membro de Cal Poly, Team 25-86, Amido Spring 2010

CPSU-AMIDO-S10S25G86

5 Membros

10 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 5,146