Conserte seus objetos

Direito de executar reparos

Loja

Motorola V551 Screen Replacement

Escrito Por: gregatron (e 6 outros contribuidores)
  • Comentários: 1
  • Favoritos: 0
  • Execuções: 2

Dificuldade

Moderado

Passos

6

Tempo necessário

20 minutos

Partes

1

Sinalizadores

2

Grammar Police

Polícia gramatical

Abrace seu professor de Inglês interior e ajude a melhorar a gramática deste guia!

Markup Mishap

Acidente de Marcação

Este guia precisa de melhores marcações. Ajude corrigindo ou fazendo algumas marcações.

Introdução

This guide is for removing the screen for the Motorola V551. A flat dental tool may be helpful for step 5 but is not necessary.

  1. Using a spudger, remove the four rubber covers from over the screws. Using a spudger, remove the four rubber covers from over the screws. Using a spudger, remove the four rubber covers from over the screws.

    • Using a spudger, remove the four rubber covers from over the screws.

    Editar

  2. Unscrew the four cover screws using the T6 bit.

    • Unscrew the four cover screws using the T6 bit.

    Editar

  4. Loosen and remove the cover with a plastic opening tool. Loosen and remove the cover with a plastic opening tool.

    • Loosen and remove the cover with a plastic opening tool.

    Editar

  5. Gently loosen the protective cover with the plastic opening tool. Gently loosen the protective cover with the plastic opening tool.

    • Gently loosen the protective cover with the plastic opening tool.

    Editar

  6. Carefully remove the protective cover from the circuitry Slowly peel the black rubber gasket up off the circuit board. Carefully move the camera out of the way using your hand.

    • Carefully remove the protective cover from the circuitry

    • Slowly peel the black rubber gasket up off the circuit board.

    • Carefully move the camera out of the way using your hand.

    • Use a flat tool to separate the connection between the upper and lower circuit boards.

    Editar

  7. Gently slip the copper strip out from under the circutry by hand. Gently slip the copper strip out from under the circutry by hand. Gently slip the copper strip out from under the circutry by hand.

    • Gently slip the copper strip out from under the circutry by hand.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Autor

com 6 outros contribuidores

gregatron

Membro desde: 29/10/2009

105 Reputação

6 Guias de autoria

Emblemas: 9

+6 outros emblemas

Equipe

Cal Poly, Team 6-6, Maness Fall 2009 Membro de Cal Poly, Team 6-6, Maness Fall 2009

CPSU-MANESS-F09S6G6

4 Membros

12 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Duração total: 3,590