Introdução

This guide is for removing the phone's earpiece speaker.

  1. Using a spudger, remove the four rubber covers from over the screws.
    • Using a spudger, remove the four rubber covers from over the screws.

  2. Unscrew the cover screws using the T6 bit
    • Unscrew the cover screws using the T6 bit

    • Loosen and remove the cover with a plastic opening tool.

    • Gently loosen the protective cover with the plastic opening tool.

    • Carefully remove the protective cover from the circuitry

    • Slowly peel the black rubber gasket up off the circuit board.

    • Carefully move the camera out of the way using your hand.

    • Use a flat tool to separate the connection between the upper and lower circuit boards.

    • Gently slip the copper strip out from under the circutry by hand.

    • Pry out the speaker using your fingers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

gregatron

Member since: 29-10-2009

72 reputação

6 Guides authored

Equipe

Cal Poly, Team 6-6, Maness Fall 2009 Membro de Cal Poly, Team 6-6, Maness Fall 2009

CPSU-MANESS-F09S6G6

4 Membros

12 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 2,588