Ir para o conteúdo principal

Introdução

This guide will help you replace the upper casing on your device. Following these steps will also enable you to replace the camera.

Peças

Nenhum componente especificado.

  1. Motorola Razr V3c Upper Casing (CDMA) Replacement, Upper Casing (CDMA): passo 1, imagem 1 %32
    • Remove the four rubber pieces from all corners of the area around the screen.

  2. Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 2, imagem 1 %32
    • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

    • Be sure that you do not strip or damage the screws.

  3. Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 3, imagem 1 %32
    • Carefully pry the screen away from the phone using a plastic spudger.

    • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

  4. Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 4, imagem 1 %32 Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 4, imagem 2 %32 Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 4, imagem 3 %32
    • Take the screen housing off of the casing.

    • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

krisko

Membro desde: 14/01/2010

95 Reputação

4 Guias de autoria

Team

Cal Poly, Team 11-4, Forte Winter 2010 Membro de Cal Poly, Team 11-4, Forte Winter 2010

CPSU-FORTE-W10S11G4

3 Membros

8 Guias de autoria

0 Comments

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Duração total: 5,162