Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Motorola Razr V3 Upper Casing Replacement

O que você precisa

  1. Motorola Razr V3 Upper Casing Replacement, Battery: passo 1, imagem 1 %32 Motorola Razr V3 Upper Casing Replacement, Battery: passo 1, imagem 2 %32
    • Remove the back cover by pressing down the silver button.

    • Pull the cover away from the phone.

  2. Motorola Razr V3 Upper Casing Replacement: passo 2, imagem 1 %32 Motorola Razr V3 Upper Casing Replacement: passo 2, imagem 2 %32
    • Remove the battery by pushing down on the top and pulling it away from the phone.

  3. Motorola Razr V3 Upper Casing Replacement, Upper Casing: passo 3, imagem 1 %32
    • Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.

    • Our phone is missing the two left screw covers, be careful not to lose yours too!

  4. Motorola Razr V3 Upper Casing Replacement: passo 4, imagem 1 %32
    • Remove the four T5 Torx screws that were underneath the rubber covers.

  5. Motorola Razr V3 Upper Casing Replacement: passo 5, imagem 1 %32
    • Use the plastic opening tool to pry the top cover away from the phone.

    • The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Ian Cottengim

Membro desde: 04/18/13

172 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team 3-46, Amido Spring 2013 Membro de Cal Poly, Team 3-46, Amido Spring 2013

CPSU-AMIDO-S13S3G46

Membros da 4

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 12

Duração total: 3,177