Pular para o conteúdo principal

Introdução

Guide to replacing your phone's motherboard.

Peças

Nenhum componente especificado.

  1. Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone. Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.
    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

  2. Tilt the battery by lifting at the exposed notch. Slide the battery out of its casing.
    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

  3. Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.
    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

  4. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  5. Use a plastic opening tool to lift the plastic casing. Pull the plastic casing directly away from the phone.
    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

  6. Lift the black rubber loudspeaker housing up and out of the plastic casing.
    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

  7. Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases. Caution: Remove carefully, if broken, the phone will not be able to make calls.
    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

  8. Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard. Caution: Remove carefully, if broken, the phone will not function properly.
    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

  9. Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out. Caution: Do this gently Unclipping too fast may cause damage to your phone.
    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Andrew Brock

Membro desde: 07-10-2011

5 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 5-34, Amido Fall 2011 Membro de Cal Poly, Team 5-34, Amido Fall 2011

CPSU-AMIDO-F11S5G34

4 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 1,149