Ir para o conteúdo principal

Motorola RIZR Z3 LCD Replacement

O que você precisa

  1. Motorola RIZR Z3 LCD Replacement, Battery: passo 1, imagem 1 %32 Motorola RIZR Z3 LCD Replacement, Battery: passo 1, imagem 2 %32
    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

  2. Motorola RIZR Z3 LCD Replacement: passo 2, imagem 1 %32 Motorola RIZR Z3 LCD Replacement: passo 2, imagem 2 %32
    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

  3. Motorola RIZR Z3 LCD Replacement, Motherboard: passo 3, imagem 1 %32
    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

  4. Motorola RIZR Z3 LCD Replacement: passo 4, imagem 1 %32 Motorola RIZR Z3 LCD Replacement: passo 4, imagem 2 %32
    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

  5. Motorola RIZR Z3 LCD Replacement: passo 5, imagem 1 %32
    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

  6. Motorola RIZR Z3 LCD Replacement: passo 6, imagem 1 %32 Motorola RIZR Z3 LCD Replacement: passo 6, imagem 2 %32
    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

  7. Motorola RIZR Z3 LCD Replacement: passo 7, imagem 1 %32 Motorola RIZR Z3 LCD Replacement: passo 7, imagem 2 %32
    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

  8. Motorola RIZR Z3 LCD Replacement: passo 8, imagem 1 %32 Motorola RIZR Z3 LCD Replacement: passo 8, imagem 2 %32
    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

  9. Motorola RIZR Z3 LCD Replacement, LCD: passo 9, imagem 1 %32
    • Turn the phone to the front.

    • Push the keypad out through the plastic casing.

  10. Motorola RIZR Z3 LCD Replacement: passo 10, imagem 1 %32
    • Turn the phone to the side.

    • Thread the hinges of the slider through their holes in the casing and pull the slider down and away from the casing.

  11. Motorola RIZR Z3 LCD Replacement: passo 11, imagem 1 %32
    • Use a T4 screwdriver to unscrew the two .15 inch screws holding the LCD to the faceplate.

  12. Motorola RIZR Z3 LCD Replacement: passo 12, imagem 1 %32 Motorola RIZR Z3 LCD Replacement: passo 12, imagem 2 %32 Motorola RIZR Z3 LCD Replacement: passo 12, imagem 3 %32
    • Use a spudger to pry the plastic screen casing partially up from the LCD unit.

    • Use the spudger to pry the ribbon cable away from its clip on the LCD unit.

    • Caution: Do this carefully, damage to this ribbon cable will cause a blank screen.

    • Pull the plastic screen casing directly away from the LCD unit.

  13. Motorola RIZR Z3 LCD Replacement: passo 13, imagem 1 %32 Motorola RIZR Z3 LCD Replacement: passo 13, imagem 2 %32
    • Use a spudger to lift the LCD partially away from the metal casing.

    • Use the spudger to pry the ribbon cable directly up from its clip on the metal casing.

    • Caution: Damage to the ribbon cable here will cause screen damage.

    • Pull the LCD completely away from the metal casing.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Brooke Shuford

Membro desde: 10/10/11

65 Reputação

Autoria de 3 guias

Equipe

Cal Poly, Team 5-34, Amido Fall 2011 Membro de Cal Poly, Team 5-34, Amido Fall 2011

CPSU-AMIDO-F11S5G34

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 952