Introdução

Use this repair guide to replace a flip-stop bumper pad in a Motorola RAZR2 v9m.

Peças

Não são necessárias peças.

Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone. The bumper is held in place with adhesive.  If you plan on reusing the bumper, then use clean tools to keep the surface sticky. Grab the bowed portion of bumper.  Gently lift and peel the bumper away from the phone.
  • Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone.

    • The bumper is held in place with adhesive. If you plan on reusing the bumper, then use clean tools to keep the surface sticky.

  • Grab the bowed portion of bumper. Gently lift and peel the bumper away from the phone.

    • Remember that the bumper will be sticky. Place it somewhere clean if you will be reusing it.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 249