Introdução

Be sure to completely power down your Moto X4 before you use the iOpener to open the phone.

Use the iOpener or a heat gun to heat up the edge of the screen. Your Moto X4 may not be water resistant after reassembly.
  • Use the iOpener or a heat gun to heat up the edge of the screen.

  • Your Moto X4 may not be water resistant after reassembly.

  • Before beginning the disassembly of your Moto X4, discharge the battery below 25%. A charged lithium-ion battery can catch fire or explode if accidentally punctured.

Adicionar comentário

Insert the spudger under the black tab by the top connector, then pry it up. Grab the cable and gently disconnect the screen from the rest of the Moto X4. Grab the cable and gently disconnect the screen from the rest of the Moto X4.
  • Insert the spudger under the black tab by the top connector, then pry it up.

  • Grab the cable and gently disconnect the screen from the rest of the Moto X4.

Adicionar comentário

Insert the spudger under the black tab by the bottom connector, then pry it up. Grab the cable and gently disconnect the screen from the rest of the Moto X4. Grab the cable and gently disconnect the screen from the rest of the Moto X4.
  • Insert the spudger under the black tab by the bottom connector, then pry it up.

  • Grab the cable and gently disconnect the screen from the rest of the Moto X4.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Brian Buchanan

Member since: 24-01-2018

518 reputação

4 Guides authored

Equipe

Cal Poly, Team S18-G4, Livingston Winter 2018 Membro de Cal Poly, Team S18-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G4

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 7

Últimos 7 dias: 75

Últimos 30 dias: 301

Todo: 947