Pular para o conteúdo principal

Introdução

For the official, updated iFixit guide, click here. This guide is archived for historical purposes.

This guide is helpful for users who are having difficulty with sound quality, clarity, or volume while taking a phone call.

  1. Insert the spudger into the notch on the corner of the phone and lift up to remove the back case. Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.
    • Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.

  2. Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.
    • Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.

  3. Lift up and remove the back panel. Lift up and remove the back panel. Lift up and remove the back panel.
    • Lift up and remove the back panel.

  4. After removing the back panel, use the             spudger to lift and detach the Battery Flux Cable from the Motherboard. After removing the back panel, use the             spudger to lift and detach the Battery Flux Cable from the Motherboard.
    • After removing the back panel, use the spudger to lift and detach the Battery Flux Cable from the Motherboard.

  5. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.
    • Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.

  6. Use a pair of tweezers to peel up the copper tape that covers the rear camera flex connector. Fold the copper tape out of the way.
    • Use a pair of tweezers to peel up the copper tape that covers the rear camera flex connector.

    • Fold the copper tape out of the way.

  7. Use the flat end of a spudger to pry up and disconnect the rear camera flex cable. Use the flat end of a spudger to pry up and disconnect the rear camera flex cable.
    • Use the flat end of a spudger to pry up and disconnect the rear camera flex cable.

  8. Carefully remove the rear camera with a pair of tweezers.
    • Carefully remove the rear camera with a pair of tweezers.

  9. Use the T4 Torx Screwdriver to remove the 2 3.2 mm screws circled in the image.
    • Use the T4 Torx Screwdriver to remove the 2 3.2 mm screws circled in the image.

  10. Use the Spudger to lift up and detach the Main Flex Cable from the Motherboard. Use the Spudger to lift up and detach the Main Flex Cable from the Motherboard.
    • Use the Spudger to lift up and detach the Main Flex Cable from the Motherboard.

  11. Use the Spudger to lift up and detach the LCD Screen Flex Cable from the Motherboard. Use the Spudger to lift up and detach the LCD Screen Flex Cable from the Motherboard.
    • Use the Spudger to lift up and detach the LCD Screen Flex Cable from the Motherboard.

  12. Use the Plastic Spudger to lift up and detach the Signal Flex Cable from the Motherboard. The Signal Flex Cable should still be attached to the body of the phone.
    • Use the Plastic Spudger to lift up and detach the Signal Flex Cable from the Motherboard. The Signal Flex Cable should still be attached to the body of the phone.

  13. Use the Spudger to lift up and remove the Motherboard from the phone. Use the Spudger to lift up and remove the Motherboard from the phone.
    • Use the Spudger to lift up and remove the Motherboard from the phone.

  14. Use the Plastic Spudger to remove the Earpiece Speaker from the phone. Use the Plastic Spudger to remove the Earpiece Speaker from the phone. Use the Plastic Spudger to remove the Earpiece Speaker from the phone.
    • Use the Plastic Spudger to remove the Earpiece Speaker from the phone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

Jack Haseman

Membro desde: 19-03-2018

1.330 reputação

6 Guias de autoria

Equipe

Baylor, Team S3-G2, Williams Spring 2018 Membro de Baylor, Team S3-G2, Williams Spring 2018

BU-WILLIAMS-S18S3G2

4 Membros

13 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 28

Todo: 908