Conserte seus objetos Comunidade Loja

Motorola MBP667CONNECT Speaker Replacement

Introdução

This guide will show users how to take apart the camera housing in order to replace the speaker.

O que você precisa

  1. Motorola MBP667CONNECT Speaker Replacement, Camera Stand: passo 1, imagem 1 %32 Motorola MBP667CONNECT Speaker Replacement, Camera Stand: passo 1, imagem 2 %32

    • Remove two 5 mm Phillips #1 screws from the bottom of the camera stand.

    Editar

  2. Motorola MBP667CONNECT Speaker Replacement: passo 2, imagem 1 %32

    • Use a nylon spudger to remove the casing.

    Editar

  3. Motorola MBP667CONNECT Speaker Replacement: passo 3, imagem 1 %32

    • Remove the two 5 mm Phillips #1 screws attached to the black plastic under the casing.

    Editar

  5. Motorola MBP667CONNECT Speaker Replacement: passo 4, imagem 1 %32 Motorola MBP667CONNECT Speaker Replacement: passo 4, imagem 2 %32

    • Remove the black circular plastic part.

    Editar

  6. Motorola MBP667CONNECT Speaker Replacement: passo 5, imagem 1 %32

    • Remove the white plastic wire housing beneath the black plastic.

    Editar

  7. Motorola MBP667CONNECT Speaker Replacement: passo 6, imagem 1 %32 Motorola MBP667CONNECT Speaker Replacement: passo 6, imagem 2 %32

    • Now, remove the bottom of the stand by pulling it from the camera.

    Editar

  8. Motorola MBP667CONNECT Speaker Replacement, Speaker: passo 7, imagem 1 %32 Motorola MBP667CONNECT Speaker Replacement, Speaker: passo 7, imagem 2 %32 Motorola MBP667CONNECT Speaker Replacement, Speaker: passo 7, imagem 3 %32

    • Remove the Phillips #1 screws on the back of the device.

    • Use a nylon spudger to remove the casing. This will separate the frontside of the camera from the backside.

    Editar

  9. Motorola MBP667CONNECT Speaker Replacement: passo 8, imagem 1 %32 Motorola MBP667CONNECT Speaker Replacement: passo 8, imagem 2 %32

    • Now locate the brackets by the speaker on the frontside of the camera and use the metal spudger to carefully disconnect from casing.

    • Continue to use the metal spudger to carefully disconnect the remaining brackets from the casing.

    Editar

  10. Motorola MBP667CONNECT Speaker Replacement: passo 9, imagem 1 %32 Motorola MBP667CONNECT Speaker Replacement: passo 9, imagem 2 %32

    • Using the soldering iron, desolder the speaker wires that are attached to the circuit board.

    • Use caution while handling the soldering iron. This tool gets very hot!

    • After desoldering the speaker wires, remove the wires from the circuit board.

    • Thread the wires from the new speaker wires through the holes in the circuit board. Using the soldering iron, re-solder the wires to the circuit board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Kyle Kramer

Membro desde: 01/16/19

255 Reputação

Autoria de 2 guias

Emblemas: 2

Equipe

Eastern Washington University, Team S1-G6, Crawford Winter 2019 Membro de Eastern Washington University, Team S1-G6, Crawford Winter 2019

EWU-CRAWFORD-W19S1G6

Membros da 4

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 162