Ir para o conteúdo principal

Motorola Droid Turbo Dual LED Flash Board Replacement

O que você precisa

  1. Motorola Droid Turbo Dual LED Flash Board Replacement, Rear Case: passo 1, imagem 1 %32
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Motorola Droid Turbo Dual LED Flash Board Replacement: passo 2, imagem 1 %32 Motorola Droid Turbo Dual LED Flash Board Replacement: passo 2, imagem 2 %32
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

  3. Motorola Droid Turbo Dual LED Flash Board Replacement, Dual LED Flash Board: passo 3, imagem 1 %32 Motorola Droid Turbo Dual LED Flash Board Replacement, Dual LED Flash Board: passo 3, imagem 2 %32
    • Use a Jimmy to separate the dual LED flash board from the rear case.

    • The board is secured with some light adhesive, so some force may be required.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Geoff Wacker

Membro desde: 09/30/13

89.849 Reputação

Autoria de 89 guias

Um comentário

Gostaria se possível alguem tenha o manual de serviço do Moto maxx XT 1225 ou 1254. Porf favor , ddani8260@gmail.com

Daniel Gomes - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 958