Ir para o conteúdo principal

Motorola Droid Pro SD Card/SIM Card PCB Board Replacement

O que você precisa

  1. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement, SD Card/SIM Card PCB Board: passo 1, imagem 1 %32 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement, SD Card/SIM Card PCB Board: passo 1, imagem 2 %32
    • Remove the back cover and battery by using the thumb tabs.

  2. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: passo 2, imagem 1 %32
    • Unscrew the 8 back panel screws using the T4 Torx screwdriver.

  3. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: passo 3, imagem 1 %32
    • Use a spudger to open the phone along the sides between the back panel and the chrome trim.

    • It is held together by small clips that lock in. You may have to use a little force to unlock them.

    • Go around on all sides then pull the back panel off.

  4. Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: passo 4, imagem 1 %32 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: passo 4, imagem 2 %32
    • Gently lift the SD & SIM card board (PCB) as shown in the following pictures.

    • This will expose the ribbon cable attached to the board and another ribbon cable for the mother board. Remove them both using the spudger.

    • Once the small one is removed the small board can be pulled off.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Peter Cakounes

Membro desde: 10/21/14

19 Reputação

Autoria de 4 guias

Equipe

UMass Dartmouth, Team 5-8, Vijaybhaskar Fall 2014 Membro de UMass Dartmouth, Team 5-8, Vijaybhaskar Fall 2014

UMASSD-VIJAYBHASKAR-F14S5G8

Membros da 4

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 5

Duração total: 193