Introdução

Motherboard installation requires a teardown of the device.

Peças

Não são necessárias peças.

Remove the battery by sliding it down the rails to which it is connected.
  • Remove the battery by sliding it down the rails to which it is connected.

Adicionar comentário

Find a flat head or Phillips head screwdriver.
  • Find a flat head or Phillips head screwdriver.

  • Insert the screwdriver into the holes in the plastic rod connecting the key pad guard to the rear casing.

  • Use the screwdriver to push the rods towards each other until they click out of their locked position.

  • Note: This may require a large amount of force.

Adicionar comentário

Slide off the antenna guard and locate the four clips on the exterior of the rear casing.
  • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

  • Simultaneously push the clips outward while lifting the rear casing and keyguard away from the front casing.

  • Remove the key guard from the rear casing by taking it out of its position.

Adicionar comentário

Locate and unplug the black component of the antenna from the motherboard.
  • Locate and unplug the black component of the antenna from the motherboard.

  • Under the black component should be a blue component. Unscrew this component in order to free the antenna.

Adicionar comentário

Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.
  • Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.

Adicionar comentário

Lift the motherboard out of its location in the front casing.
  • Lift the motherboard out of its location in the front casing.

  • Do this slowly and gently so that none of the motherboard's components are damaged.

Adicionar comentário

With your new motherboard, hold the LCD side of the motherboard face down. Align the four clips on the front casing with the four notches on the motherboard.
  • With your new motherboard, hold the LCD side of the motherboard face down. Align the four clips on the front casing with the four notches on the motherboard.

  • While doing so, insert the LCD into the compartment in the front casing.

Adicionar comentário

Press firmly on the motherboard until it is snug inside the casing.
  • Press firmly on the motherboard until it is snug inside the casing.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Andrew Lam

Member since: 17-04-2012

28 reputação

5 Guides authored

Equipe

Cal Poly, Team 9-46, Regan Spring 2012 Membro de Cal Poly, Team 9-46, Regan Spring 2012

CPSU-REGAN-S12S9G46

5 Membros

8 Guides authored

Nice, thanks.

Daniel - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 2,335