Conserte seus objetos Comunidade Loja

Motorola California Mobile Phone Antenna Replacement

Introdução

Use this guide to replace the pull-out antenna through the back of the device.

O que você precisa

  1. Motorola California Mobile Phone Antenna Replacement, Antenna: passo 1, imagem 1 %32

    • Remove the battery by sliding it down the rails to which it is connected.

    Editar

  2. Motorola California Mobile Phone Antenna Replacement: passo 2, imagem 1 %32

    • Insert the Phillips 00 screwdriver into the holes that connect the key pad guard to the rear casing in the plastic rod.

    • The following step may require a substantial amount of force.

    • Use the screwdriver to push the rods towards each other until they click out of their locked positions.

    Editar

  3. Motorola California Mobile Phone Antenna Replacement: passo 3, imagem 1 %32

    • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

    • Push the clips outward while simultaneously lifting the rear casing and keyguard away from the front casing.

    Editar

  4. Motorola California Mobile Phone Antenna Replacement: passo 4, imagem 1 %32

    • Locate and unplug the black component of the current antenna from the motherboard.

    • Under the black component there should be a blue component.

    • Unscrew the blue component in order to free the antenna.

    Editar

  6. Motorola California Mobile Phone Antenna Replacement: passo 5, imagem 1 %32

    • Slide the antenna out of the green tubing.

    • Slide the green tubing out of its hole.

    Editar

  7. Motorola California Mobile Phone Antenna Replacement: passo 6, imagem 1 %32

    • Insert the new green tubing into the corresponding slot.

    Editar

  8. Motorola California Mobile Phone Antenna Replacement: passo 7, imagem 1 %32

    • Insert the new antenna into the green tubing.

    Editar

  9. Motorola California Mobile Phone Antenna Replacement: passo 8, imagem 1 %32

    • Screw the blue piece of the antenna into the threaded hole on the motherboard until it is tight.

    Editar

  10. Motorola California Mobile Phone Antenna Replacement: passo 9, imagem 1 %32

    • Align the protruding wire on the black component with the corresponding hole on the motherboard.

    • Push the wire into the hole.

    Editar

  11. Motorola California Mobile Phone Antenna Replacement: passo 10, imagem 1 %32

    • Reverse the instructions from Step 2 to re-install the keypad guard and rear casing onto the device.

    Editar

  12. Motorola California Mobile Phone Antenna Replacement: passo 11, imagem 1 %32

    • Push down on the antenna guard until it clicks into place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 13 outros contribuidores

Andrew Lam

Membro desde: 04/17/12

35 Reputação

Autoria de 4 guias

Emblemas: 9

+6 outros emblemas

Equipe

Cal Poly, Team 9-46, Regan Spring 2012 Membro de Cal Poly, Team 9-46, Regan Spring 2012

CPSU-REGAN-S12S9G46

Membros da 5

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 8

Duração total: 1,833