Pular para o conteúdo principal
  1. Remove the speaker wires from the motherboard by pinching the plastic tab at the end of the cable and pulling towards you. Remove the speaker wires from the motherboard by pinching the plastic tab at the end of the cable and pulling towards you.
    • Remove the speaker wires from the motherboard by pinching the plastic tab at the end of the cable and pulling towards you.

  2. Unscrew 1.2 cm Torx security screw, holding the silver circle connector,  to disconnect the wire from the speakerboard to the motherboard Unscrew 1.2 cm Torx security screw, holding the silver circle connector,  to disconnect the wire from the speakerboard to the motherboard
    • Unscrew 1.2 cm Torx security screw, holding the silver circle connector, to disconnect the wire from the speakerboard to the motherboard

  3. Remove the black putty from the speaker wires at both ends of the speaker board.
    • Remove the black putty from the speaker wires at both ends of the speaker board.

  4. Solder the black plastic encasing the red and black wires. Solder the black plastic encasing the red and black wires. Solder the black plastic encasing the red and black wires.
    • Solder the black plastic encasing the red and black wires.

  5. Remove both the black and red wires with pliers Pliers may stick to speaker because it is magnetic.
    • Remove both the black and red wires with pliers

    • Pliers may stick to speaker because it is magnetic.

  6. Tuck wires through the hole where the speaker is located, then gently push the speaker out. The 1.2 cm Torx security screws that stayed in place near the speaker will now fall out.
    • Tuck wires through the hole where the speaker is located, then gently push the speaker out.

    • The 1.2 cm Torx security screws that stayed in place near the speaker will now fall out.

    • To remove the other speaker repeat steps 3-6

Conclusão

To reassemble your device, follow these instructions in reverse order.

Heather Carrillo

Membro desde: 12-09-2016

364 reputação

2 Guias de autoria

Equipe

CSU Fullerton, Team 2-6, Bruce Fall 2016 Membro de CSU Fullerton, Team 2-6, Bruce Fall 2016

CSUF-BRUCE-F16S2G6

4 Membros

4 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 265