Ir para o conteúdo principal

Monster DNA Speaker Replacement

O que você precisa

  1. Monster DNA Speaker Replacement, Speaker: passo 1, imagem 1 %32 Monster DNA Speaker Replacement, Speaker: passo 1, imagem 2 %32
    • Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.

    • Desolder the wires to completely remove the speaker.

    • Take note of the proper location of the wires reassembly.

    • Use a heatgun to loosen the glue holding down the speaker.

    • Be careful to take safety precautions such as gloves as not to cause injury.

  2. Monster DNA Speaker Replacement: passo 4, imagem 1 %32
    • Pry the speaker out using a plastic opening tool or metal spudger.

    • Using too much force will damage the headphones and the new speaker may not go back into place properly.

  3. Monster DNA Speaker Replacement: passo 5, imagem 1 %32
    • Insert new speaker and solder the five wires into corresponding positions onto the new speaker.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kevin Costello

Membro desde: 03/22/17

231 Reputação

Autoria de 2 guias

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 7

Últimos 30 dias: 11

Duração total: 1,593