Conserte seus objetos Comunidade Loja

Modal MD-SPBT01 Metal Speaker Covering Replacement

Introdução

A damaged metal speaker covering may be bent or misshapen, causing it to continuously fall out of its place. This guide allows one to replace the covering to return the speaker to its original condition.

O que você precisa

  1. Modal MD-SPBT01 Metal Speaker Covering Replacement, Metal Speaker Covering: passo 1, imagem 1 %32 Modal MD-SPBT01 Metal Speaker Covering Replacement, Metal Speaker Covering: passo 1, imagem 2 %32

    • Remove the damaged metal speaker covering using the plastic opening tool.

    • The covering may be damaged that it is already out of its original place. If this is the condition, you may skip this step.

    Editar

  3. Modal MD-SPBT01 Metal Speaker Covering Replacement: passo 2, imagem 1 %32

    • Line up the replacement metal covering with the interior square ridge of the speaker.

    Editar

  4. Modal MD-SPBT01 Metal Speaker Covering Replacement: passo 3, imagem 1 %32

    • Firmly press the metal cover into the speaker until it is snug.

    • Super glue may be used to keep the cover in its place, although it is not necessary.

    Editar
Linha de Chegada

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Caitlyn Higgins

Membro desde: 10/13/15

134 Reputação

Autoria de 1 guia

Emblemas: 4

+1 outro emblema

Equipe

Sam Houston State, Team 2-4, Blackburne Fall 2015 Membro de Sam Houston State, Team 2-4, Blackburne Fall 2015

SHSU-BLACKBURNE-F15S2G4

Membros da 3

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 2

Duração total: 429