Modal MD-SPBT01 LED Light Wiring Replacement - Guia de Reparo iFixit

Introdução

For this guide, we will be opening up the speaker and taking the defective LED wiring out so the light works again.

O que você precisa

Passo 1 LED Light Wiring

Modal MD-SPBT01 LED Light Wiring Replacement, LED Light Wiring: passo 1, imagem 1 %32

Modal MD-SPBT01 LED Light Wiring Replacement, LED Light Wiring: passo 1, imagem 2 %32

Use your plastic opening tool to pry the metal speaker cover off.

Passo 2

Modal MD-SPBT01 LED Light Wiring Replacement: passo 2, imagem 1 %32

You can now use the Phillips #00 screwdriver to remove the four screws.

Passo 3

Modal MD-SPBT01 LED Light Wiring Replacement: passo 3, imagem 1 %32

With the screws removed, you can now remove the top piece of the speaker to gain access to the interior.

Passo 4

Modal MD-SPBT01 LED Light Wiring Replacement: passo 4, imagem 1 %32

Locate the LED wire connection and remove it from the mother board.
To make replacing the LED wiring easier, remove the speaker wire to fully disconnect the speaker from the mother board.

Passo 5

Modal MD-SPBT01 LED Light Wiring Replacement: passo 5, imagem 1 %32

Now you can remove the wiring from the speaker side of the device.
It might take a bit of work to remove the wires because they are glued down on this side.

Passo 6

Modal MD-SPBT01 LED Light Wiring Replacement: passo 6, imagem 1 %32

Now with the LED wiring removed, a new wire can be installed.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Nathan Hall

Membro desde: 10/13/15

258 Reputação

Autoria de 2 guias

+9 outros emblemas

Equipe

Sam Houston State, Team 2-4, Blackburne Fall 2015 Membro de Sam Houston State, Team 2-4, Blackburne Fall 2015

SHSU-BLACKBURNE-F15S2G4

Membros da 3

Autoria de 4 guias

0 comentários

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 622