Pular para o conteúdo principal

Introdução

This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

  1. Begin disassembling the phone by removing the back of the phone and the battery.
    • Begin disassembling the phone by removing the back of the phone and the battery.

  2. Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver
    • Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

  3. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  4. Pry the font plastic component from the “motherboard” component.
    • Pry the font plastic component from the “motherboard” component.

  5. Take out the old rubber keypad and replace with a new one.
    • Take out the old rubber keypad and replace with a new one.

  6. Reassemble by following previous steps in reverse order.
    • Reassemble by following previous steps in reverse order.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Katherine

Membro desde: 13-02-2014

22 reputação

Autoria de 1 guia

Equipe

Ohio State, Team 1-5, Meza Spring 2014 Membro de Ohio State, Team 1-5, Meza Spring 2014

OSU-MEZA-S14S1G5

4 Membros

4 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 509