1. Lift the black cover off. Remove all 4 Phillips #2 screws. Remove all 4 Phillips #2 screws.
    • Lift the black cover off.

    • Remove all 4 Phillips #2 screws.

  2. Remove the two 24mm Phillips #2 screws.
    • Remove the two 24mm Phillips #2 screws.

    • Remove the three 8mm Phillips #2 screws.

  3. Lift the back and pry the back off. The panel is held in with clips on the side. It needs a lot of force the take it off. The panel is held in with clips on the side. It needs a lot of force the take it off.
    • Lift the back and pry the back off.

    • The panel is held in with clips on the side. It needs a lot of force the take it off.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  5. Remove the four 5mm nut screws. Remove the four 5mm nut screws.
    • Remove the four 5mm nut screws.

  6. Remove the seven Phillips #1 screws. Remove the seven Phillips #1 screws.
    • Remove the seven Phillips #1 screws.

  7. Remove the three Phillips #2 screws. Remove the two data/power cables.
    • Remove the three Phillips #2 screws.

    • Remove the two data/power cables.

    • Remove the two speaker cables.

  8. Remove the Phillips #2 screws from the speaker(s). Remove the Phillips #2 screws from the speaker(s).
    • Remove the Phillips #2 screws from the speaker(s).

  9. Pull the speaker off the slots. Pull the speaker off the slots. Pull the speaker off the slots.
    • Pull the speaker off the slots.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Padraic Hoselton

Member since: 22-08-2017

2.824 reputação

13 Guides authored

Equipe

Master Techs Membro de Master Techs

Community

280 Membros

784 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 27