Lift the black cover off.
  • Lift the black cover off.

  • Remove all 4 Phillips #2 screws.

Adicionar comentário

Remove the two 24mm Phillips #2 screws.
  • Remove the two 24mm Phillips #2 screws.

  • Remove the three 8mm Phillips #2 screws.

Adicionar comentário

  • Lift the back and pry the back off.

  • The panel is held in with clips on the side. It needs a lot of force the take it off.

Adicionar comentário

  • Remove the four 5mm nut screws.

Adicionar comentário

  • Remove the seven Phillips #1 screws.

Adicionar comentário

  • Remove the three Phillips #2 screws.

  • Remove the two data/power cables.

  • Remove the two speaker cables.

Adicionar comentário

  • Pull the two tabs.

  • Pull the connector off.

Adicionar comentário

  • Remove the switch cable off.

  • Remove the two Phillips #2 screws.

Adicionar comentário

  • Remove the four display power cables.

  • These cables are interchangeable.

Adicionar comentário

  • Lift the display out.

Adicionar comentário

  • Remove the four Phillips #2 screws.

  • These screws release the display from its enclosure. Hold the screen when removing these screws.

Adicionar comentário

  • Remember to plug in all the cables on the display.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Padraic Hoselton

Member since: 22-08-2017

2.781 reputação

13 Guides authored

Equipe

Master Techs Membro de Master Techs

Community

277 Membros

748 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 35