Introdução

Before you start the replacement process, make sure that you have the proper repair tools, a Philips PH0 head and tweezers. You should be careful not to exert too much pressure/force on the components.

This guide will be able to walk you through the steps to replace your Mio ALPHA 2's motherboard.

Remove the four 6.7mm JIS #00 screws from the back cover. Remove the four 6.7mm JIS #00 screws from the back cover.
  • Remove the four 6.7mm JIS #00 screws from the back cover.

Adicionar comentário

Pull off the back cover of the watch Use a pair of tweezers to flip up the retaining flap on the  ribbon cable ZIF socket. Remove the ribbon cable from its socket.
  • Pull off the back cover of the watch

  • Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.

  • Remove the ribbon cable from its socket.

Adicionar comentário

Remove the four 3.8mm JIS #00 screws from the motherboard. Remove the motherboard with tweezers Remove the motherboard with tweezers
  • Remove the four 3.8mm JIS #00 screws from the motherboard.

  • Remove the motherboard with tweezers

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Wong Jun Hua

Member since: 21-05-2018

169 reputação

2 Guides authored

Equipe

IUPUI, Team S1-G3, Harley Spring 2018 Membro de IUPUI, Team S1-G3, Harley Spring 2018

IUPUI-HARLEY-S18S1G3

6 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 10

Todo: 33